architect' 16 Booth E709

April 26-May 1, 2016







Switch Actuator


Product Description

The MR0810.432 relay module can supply 8 channels with a current of 10A. This module is able to support diversified devices, and can be applied in to any solution which requires switching control.
Zero power consumption
Using a high performance magnetic launching relay the MR0810.432 does not consume any power in standby mode, and when the module is triggered it only uses a momentary DC Pulse.
Each of the 8 channels that the module outputs to support 10A. Due to the inclusion of a 16A magnetic relay, the module has a guaranteed stable performance, and lower maintenance requirements. This built in redundancy ensures the module has a long and efficient service life.
Multiple loads
Thanks to the built in 16A magnetic relay, the module can handle a 500A current surge. This enables the module to switch multiple loads from a wide range of sources. From lighting, heating, motors, transformers, valves and power sockets, this module unifies and streamlines control into one simple to install and operate package.
Power on protection
All of the modules 8 channels feature a power on protection delay time; this delay time is adjustable from 0-60 minutes. This delay protection safeguards lights that are connected to the module providing a hassle free service and a maximized life expectancy
Network protection
In order to protect the power network the MR0810.432, has a delay time from 0-25 seconds. This ensures that the danger posed to the power network by current surges when multiple devices are turned on is negated.
■ 8-channel Relay output unit.
■ Scene controller function available.
■ Up to 8 separate areas.
■ Each area has 16 scenes with maximum running time of 60 minutes.
■ Each channel has light protection delay (0-60 minutes).
■ Each channel has batch turn-on delay(0-25 seconds).
■ Each channel has manual control for relay unit.
■ You can select specified scene or scene before power off when the device restarts
■ Supports easy programming and Buspro online upgrading.
■ Communication: Buspro
Electrical Parameters:
-Working power: DC15~30V
-Static power consumption: 15mA/DC24V
-Dynamic power consumption: 40mA/DC24V
-Output channel: 8CH/10A
-Relay: 16A Magnetic latching relay
-Max current in each channel: 10A
-Electronic life time of relay: >60000 (Resistance Load)
-Protection: Connect a breaker in each channel
Product Information:
-Dimensions: 144×90×66 (mm)
-Weight: 361g
-Housing material: Nylon, PC
-Installation: 35mm DIN rail installation







Copyright © 2008 All rights reserved

Tel: +66-34-871589 Fax: +66-34-871591 Mobile: +66-8-09090918