architect' 16 Booth E709

April 26-May 1, 2016

 

 
     

Side_productMenu

 

 

 

 

Product Description


As a DMX recorder the module has the ability to record scenes from DMX resources, and then play the scene back enabling the control of various DMX devices, such as moving head lighting, and LED lighting etc. The unit can automatically record, play, or delete files, and has single play or repeat play modes.
Multi-functional controller
The unit has three selectable DMX controlling functions, in one simple to use module. The M-DMX512.1 is capable of being a DMX recorder, a DMX dimmer, and converter between the DMX system and the KNX/EIB bus system.
Ability to record scenes for 4 hours
With an extensive memory capacity, the M-DMX512.1 can record up to four hours’ worth of scenes from other lighting consoles. Because of this amazing lighting scenes can be created on the lighting consoles, and then quickly and easily saved to the DMX recorder.
Multi operational support
The working modes of the recorder can be operated in various ways, giving an efficient ergonomic user experience. The recorder can be operated by its onboard buttons, or via a wall panel DLP unit.
DMX input controlling
Support is given to the reception of DMX signals from the DMX console, control over the dimming and switching features of the HDL KNX/EIB system is also supported.
DMX output controlling
Through the M-DMX512.1, the KNX/EIB system is enabled to output DMX signals, which can control DMX devices in the DMX system. The M-DMX512.1 can control all DMX devices, but commonly controlled are color changing LEDs, DMX dimming, moving head lights, and lasers.
Functions
● The DMX Recorder have three work mode, DMX recorder mode, DMX dimming( EIB to DMX) mode and DMX to EIB(1bit,1byteData Point)
mode. Support recording from DMX line or Art-Net
● DMX recorder mode can store and playback 24 programs, The time of each program can reach 4 hours.
● DMX dimming mode support Max. 48 channels switching and dimming via EIB, Means allow you to control DMX device from KNX system
● DMX to EIB mode support Max. 48 channels switching and absolute dimming via DMX signal. Means allow you to control KNX system from DMX memory console.
● DMX output for LED color changing, DMX dimming and Moving head , Laser and other DMX control.
● DMX input control functions for KNX include switch control, sequence control, scene control, Relative dimming, Absolute dimming.
Electrical Parameters:
-Working Voltage: DC 21-30V
-Control Interface: KNX/EIB
-KNX Terminal: (Red /Black) 0.6-0.8mm Diameter Single Core
-Input/ Output signal: DMX512-1990, ArtNet, HDL Net DMX
-AUX Power supply: 40mA/DC24V
-Other Terminals: Line In, Line Out for each channel 1 x 2.5mm2 max conductor size
Approved:
-CE
-KNX
Product Information:
-Dimensions: 90 x 72 x 66(mm)
-Housing Material: Nylon

 

 
 

 

 

 
     
Animation

 

Copyright © 2008 www.geigcl.com. All rights reserved

Tel: +66-34-871589 Fax: +66-34-871591 Mobile: +66-8-09090918