architect' 16 Booth E709

April 26-May 1, 2016

 

 
     

Side_productMenu

 

 

 

 


Product Description


The M-IRAC.1 is able to store IR codes after they have been learnt by the IR learner. The module can store 650 IR codes, which can then be used to control multitude appliances. Software upgrades to the M-IRAC.1are also possible via the KNX software.


IR emitter
The ability to emit IR codes allows the M-IRAC.1to manage any device that has an IR receiver, from televisions and air conditioners, to DVD players and amplifiers, control over all appliances that use IR communication is possible. The module is able to support multiple control modes such as single control, repeat control, sequence control, air-conditioner control, universal control and current detection.
Up to 650 IR codes
A massive 650 IR codes can be stored on the module, giving the user total control over every appliance that utilizes IR communication. A total of 150 IR codes can be used for universal control enabling the module to replace any standard IR controller. The remaining codes can then be used to control all functions available on an air conditioner.
Built-in Current detection
With a dedicated current detection function, the unit can monitor the standby currant and the working current of an appliance. These two current values enable the IR emitter to recognize if the appliance is active or on standby. The IR emitter is then able to send the corresponding IR code accordingly.
Functions
■ The device working mode: Single mode, Repeat mode, Sequence mode , Air-condition control , Current detection.
■ By using the IR Learner to learn the IR Codes from the normal remote, and downloaded into IR AC controller by KNX Assistant software, then it can control other IR device, such as TV, DVD, AC, Amplifier etc.
■ Building current sensor, to assure the status of device is ON or OFF.
Electrical Parameters:
-Working Voltage: 21-30VDC
-Communication : KNX/EIB
-KNX Terminal: KNX Bus Terminal – (Red /Black) 0.6 – 0.8mm Diameter Single Core
-Dynamic Current: <15mA
-Transmitting carrier wave frequency: 38KHz
-Emission distance: 7m
-Current detection: <2A
-Temperature range of IR code: 20℃~30℃
Approved:
-CE
-KNX
Product Information:
-Dimensions: 45 x 45 x 16(mm)
-Housing Material: ABS

 

 
 

 

 

 
     
Animation

 

Copyright © 2008 www.geigcl.com. All rights reserved

Tel: +66-34-871589 Fax: +66-34-871591 Mobile: +66-8-09090918